12 October 2002

We thank PROMETEUS LDA of Luanda for their order for a MB* Skip Loader to be fitted to an IVECO ML150E21H chassis. The unit will be shipped directly from the Bari Factory to Luanda where it will be handed over to the Client.

Detailed Specifications are available

Chassis    Bodywork

OPERATING CONTROLS

Main Boom Cylinders
Jack Leg Cylinders
Trip Hook
PTO    Outside, drivers side
Outside, drivers side
Outside, drivers side
In Cab
LIFTING ARM SPECIFICATIONS
Model    Clearance Under Cross member (mm)    Gross Lifting Capacity (kg)
CH503-9E
CH503-13E
CH503-16    2200
2200
NA    9000
13000
16000
CONSTRUCTION SPECIFICATIONS
Item

Thickness (mm)

Boom Arms
Keyplate
Deck
Subframe Longitudinal
Subframe Cross members
Outriggers    
6
20
5
5
76x38 RSC
76x38 RSC

CHASSIS REQUIREMENTS (Typical)
Model    Cab Configuration    Front Axle Rating (kg)    Rear Axle Rating (kg)    GVM / GVW (kg)    WB (mm)    Rear Overhang (mm)
CH503-9E

CH503-13E
CH503-16    Cab over axle
Cab behind axle*
Cab over axle
Cab over axle    
6500

7500
7500

9000

18000
18000    16000

26000
26000    3600
3850
3850

Minimum
Minimum
Minimum
Minimum
* To suit chassis
HYDRAULIC SPECIFICATIONS
Model    Pump    Hydraulic Oil Reservoir    Valves
Type    Max Operating Pressure Mpa    Flow rate l/min    Capacity litres    Filtration (micron)    Control
Suction    Return
CH503-9E
CH503-13E
CH503-16

Gear
Gear
Gear    22
22
24    65
65
65-80    60
60
90    125
125
125    10
10
10    Spool
Spool
Spool
Model    Cylinders    Main Boom    Jack Leg
CH503-9E
CH503-13E

Number
Bore (mm)
Stroke (mm)    2
125
1915    2
90
348
CH503-16

Number
Bore (mm)
Stroke (mm)    2
150
1915    2
90
348
BODY SPECIFICATIONS
Model    Traveling Height (mm)    Maximum Height (mm)    Body Width (mm)    Deck Height (mm) *    Mass (kg)
CH503-9E
CH503-13E
CH503-16    2700
2700
2665    3350
3350
3150    2500
2500
2500    360
360
285    2940
2940
3400
* Above chassis
GENERAL DESCRIPTION
Two booms are activated by two generously designed double acting cylinders. High Tensile chains fitted with key plates to IWM specifications are suspended from the boom arms to facilitate loading/unloading and tipping functions. When tipping a bin high tensile hydraulically tip hooks can be provided as an optional extra.

To stabilize the vehicle and for leveling on uneven ground two independently controlled hydraulic jack legs are fitted to the rear of the body. To ensure safe operation and control, engine speed is automatically set via a switch located together with the hydraulic controls on the front side of the body according to left or right hand drive models. To safeguard against over-revving and driving with the hydraulics engaged it is recommended that a re-limiter and a power take off "fail safe" system be fitted by us as an optional extra at the time of purchase.

Extensive use of high-tensile, jigged construction and modern welding procedures ensure a long trouble free life for the Skip Master range.

The HC-250 Refuse Compactor fitted with top winch

The ideal compactor for large clean-up operations. User friendly, simple to operate and highly effective with excellent compaction ratios and a 20,6m3 capacity. This vehicle is ideally suited to Municipal applications where large amounts of mixed industrial and domestic refuse is to be collected.

Features:

bullet    Acceptable purchase price
bullet    Availability of various types of bin handling equipment
bullet    Low cost of operation
bullet    High "legal" payloads
bullet    Ease of operation
bullet    2,3m3 Hopper capacity
bullet    12 second reload cycle time
bullet    Low sill height (120mm below chassis) when manual bag loading takes place
We are able to export these units either CBU on chassis or in SKD form for mounting elsewhere. Enquiries are most welcome.

SPECIFICATIONS
A HEAVY DUTY compactor for domestic, commercial and industrial use.

OPERATING CONTROLS
Packing
Tailgate Raise
Ejector
PTO
Engine Speed Up
Signal Buzzer    Rear of Body
Front of Body
Front of Body
In Cab
Front of Body
Rear of Body
CONSTRUCTION SPECIFICATIONS
Sides
Roof
Floor
Subframe Longitudinal
Subframe Cross Members & Outriggers
Hopper Floor
Hopper Sides
Sweeper Blade
Ejector Panel    3*
3*
3*
5
5
6*
3*
5
3*                           *Corten Steel
VALVES

Packing Control    Ejector    Tailgate Raise
Spool    Spool    Spool
CHASSIS REQUIREMENTS (Typical)

Model    Cab Type    Front Axle Rating (kg)    Rear Axle Rating (kg)    GVM (GVW) kg    Wheelbase mm    Rear Overhang mm
HC-250    Cab over Axle    7500    20400    27900    4800    1550
TAILGATE SPECIFICATIONS
Model    Hopper Capacity (m3)    Loading Sill height (mm)    Hopper Loading Width (mm)    Hopper Opening Height (mm)    Cycle Time (s)
HC-250    2.3    120    2083    1524    30
HYDRAULIC SPECIFICATIONS

Pump

Hydraulic Oil Reservoir
Type    Max. Operating Pressure (MPa)    Flow Rate (l/min)    Capacity litres    Filtration (micron)
Suction    Return
Gear    14    100    190    125    10
HYDRAULIC CYLINDERS
Cylinders    Tailgate Raise    Packer Blade    Sweeper Blade    Ejector
Number    2    2    2    1
Bore (mm)    115    139    114    140 Multi Stage
Stroke (mm)    715    815    558    
BODY SPECIFICATIONS

Model    Body capacity (m3)    Body Length (mm)    Body Width (mm)    Body Height (mm)    Mass Weight (kg)
HC-250    20.6    6655    2261    2292    6300
The specifications shown are only guidelines - the dimensions, masses and all information is based on average chassis dimensions and actual results will vary depending on final requirements on the client.